The new IP network Wisenet X Plus dome cameras from Hanwha Techwinhave been designed to reduce the time normally needed for installation, set-up and maintenance adjustments.

　　With a four-part magnetic modular design, the domes come with a number of other practical features which help minimise the time installers have to spend on site. These include:

　　- Magnets which lock sensor modules into the dome housing;

　　- Prefigure IP network settings without the need to remove the camera module from the box;

　　- The network cable can be inserted through the waterproof gland with the aid of an RJ45 plastic push-through device, negating the need to re-make a cable end; 

　　- A motorised PTRZ gimbal enables installers to remotely pan, tilt, rotate and zoom the lens position, to set the camera's field of view.

　　Fifteen X Plus models include internal, external and flush mounted options. All use the Wisenet 5 DSP chipset. The 2MP models also offer Wide Dynamic Range (WDR) which performs at up to 150dB to produce images in scenes that contain very bright and very dark areas at once. The 5MP models provide 120dB WDR.

　　Other features include an extended tilt range of up to 85 degrees for wide area coverage, particularly in locations with low ceiling heights; shock-detection via built-in gyro sensors, for detecting unusual physical shocks and generates alerts to enable operators to respond to any incidents; and audio playback on event. Up to five pre-recorded warning messages can be stored on a Wisenet Plus dome and programmed to automatically play when pre-defined events occur. As for environmental protection, the six cameras have a Gore valve to protect their housings against water, salt or corrosive liquids and can be supplied with an optional weather cap. They all have an operating temperature range of minus 58 degrees to 140 degrees F (minus 50 degrees, to 60 degrees C).

　　Hanwha Techwin公司的新型IP网络Wisenet X Plus半球型摄像机旨在减少安装，设置和维护调整所需的时间。

　　该摄像机采用四部分模块化设计，且具有许多其他实用功能，有助于最大限度地缩短安装人员在现场花费的时间。这些包括：

　　 - 通过磁铁将传感器模块锁定在半球摄像机外壳中;

　　 - 无需从摄像机外壳中取出相机模块就能预设IP网络设置;

　　 - 借助RJ45塑料穿通装置，可以通过防水密封管插入网络电缆，无需重新制作电缆端口;

　　 - 电动PTRZ云台使安装人员能够远程平移，倾斜，旋转和缩放镜头位置，以便设置摄像机的视野。

　　具有15种X Plus型号，且包括内部，外部和嵌入式安装选项。全部使用Wisenet 5 DSP芯片组。 2MP型号还提供宽动态范围（WDR），可在高达150dB的频率下同时在包含非常明亮和非常暗的区域的场景中生成图像。 5MP型号提供120dB WDR。

　　其他功能包括最大85度的扩展倾斜范围，适用于广域覆盖，特别是在天花板高度较低的位置;通过内置陀螺仪传感器进行冲击检测，用于检测异常物理冲击并生成警报，对事件做出音频反馈，使操作员能够对任何事故做出响应;最多可将五个预先录制的警告信息存储在Wisenet Plus半球摄像机上，并编程为在预定义事件发生时自动播放。至于环保方面，六台摄像机配有戈尔阀门，可以保护其外壳免受水，盐或腐蚀性液体的影响，并可提供可选的防风雨盖。它们的工作温度范围均为华氏零下58度至140度（零下50度至60摄氏度）。